Bumpers & Fenders
-
Item # 96382
- Constructed of incredibly durable tri-laminate material with polycarbonate grommets
- Traditional round fenders protect hulls fairly well, but not gunwales.
- Ski boats, bass boats and runabouts with step-down gunwales are especially vulnerable to damage from docks.
- The HULL HUGR Contour Fender hinges to wrap around the gunwale and hull, following the contours of the boat. It can be used as a flat fender too.
Regular Price $32.95 -
Item # 96383
- Constructed of incredibly durable tri-laminate material with polycarbonate grommets
- Traditional round fenders protect hulls fairly well, but not gunwales.
- Ski boats, bass boats and runabouts with step-down gunwales are especially vulnerable to damage from docks.
- The HULL HUGR Contour Fender hinges to wrap around the gunwale and hull, following the contours of the boat. It can be used as a flat fender too.
Regular Price $32.95 -
Item # 96384
- Constructed of incredibly durable tri-laminate material with polycarbonate grommets
- Traditional round fenders protect hulls fairly well, but not gunwales.
- Ski boats, bass boats and runabouts with step-down gunwales are especially vulnerable to damage from docks.
- The HULL HUGR Contour Fender hinges to wrap around the gunwale and hull, following the contours of the boat. It can be used as a flat fender too.
Regular Price $32.95 -
Item # 96385
- Large 30″ L × 6″ W × 4″ H size — offers more surface coverage and better impact protection
- Contoured, hinged design — hugs gunwale and hull curves for secure, slip-free fit
- Marine-grade tri-laminate construction with closed-cell foam — built to resist saltwater, UV exposure, and abrasion
- Polycarbonate grommets on ends — let you easily secure or hang the fender without scratching gelcoat or dock surfaces
- Can be used contoured or flat — versatile enough to protect hulls, gunwales, or dock edges depending on docking needs
Regular Price $44.95 -
Item # 96386
- Large 30″ L × 6″ W × 4″ H size — offers more surface coverage and better impact protection
- Contoured, hinged design — hugs gunwale and hull curves for secure, slip-free fit
- Marine-grade tri-laminate construction with closed-cell foam — built to resist saltwater, UV exposure, and abrasion
- Polycarbonate grommets on ends — let you easily secure or hang the fender without scratching gelcoat or dock surfaces
- Can be used contoured or flat — versatile enough to protect hulls, gunwales, or dock edges depending on docking needs
Regular Price $44.95 -
Item # 96387
- Large 30″ L × 6″ W × 4″ H size — offers more surface coverage and better impact protection
- Contoured, hinged design — hugs gunwale and hull curves for secure, slip-free fit
- Marine-grade tri-laminate construction with closed-cell foam — built to resist saltwater, UV exposure, and abrasion
- Polycarbonate grommets on ends — let you easily secure or hang the fender without scratching gelcoat or dock surfaces
- Can be used contoured or flat — versatile enough to protect hulls, gunwales, or dock edges depending on docking needs
Regular Price $44.95 -
Item # 96388
- Flat, compact 26" × 6" × 2.5" profile — fits tight slips and narrow docking spaces
- Marine-grade tri-laminate construction with closed-cell foam — resists saltwater, UV, and abrasion
- Design minimizes rolling and shifting — stays secure when moored or rafting
- Polycarbonate grommets on ends — allows easy attachment to cleats, railings, docks or pilings
- Multi-purpose use — suitable for boats, docks, or as additional protection when rafting or mooring
Regular Price $32.95 -
Item # 96389
- Flat, compact 26" × 6" × 2.5" profile — fits tight slips and narrow docking spaces
- Marine-grade tri-laminate construction with closed-cell foam — resists saltwater, UV, and abrasion
- Design minimizes rolling and shifting — stays secure when moored or rafting
- Polycarbonate grommets on ends — allows easy attachment to cleats, railings, docks or pilings
- Multi-purpose use — suitable for boats, docks, or as additional protection when rafting or mooring
Regular Price $32.95 -
Item # 96390
- Flat, compact 26" × 6" × 2.5" profile — fits tight slips and narrow docking spaces
- Marine-grade tri-laminate construction with closed-cell foam — resists saltwater, UV, and abrasion
- Design minimizes rolling and shifting — stays secure when moored or rafting
- Polycarbonate grommets on ends — allows easy attachment to cleats, railings, docks or pilings
- Multi-purpose use — suitable for boats, docks, or as additional protection when rafting or mooring
Regular Price $32.95 -
Item # DPB-B- Designed to easily slide over 1-1/2" dock pipe
- Built to withstand harsh dock environments
- Equipped with an inflation valve to adjust firmness as needed
- Provides excellent protection for pipe-supported docks
- Dimensions: 7" diameter x 17" long
Regular Price $39.99Only 1 left -
Item # DRW-TMP-24- Molded from UV stabilized polyethylene
- 24" diameter with an 8" tread width
- Fits axles from 1.60" to 1.90" diameter
- 800 lbs. load rating
Regular Price $66.45 -
Sold OutItem # FM-05W- Ideal for most boats ranging from 30' to 90'
- Mounts to any nominal 2" x 4" or 4" x 4"
- Fender only, end cap and lumber sold separately
Regular Price $74.66 -
Item # FM-ECB- For use with 4" x 4" lumber and can be cut for 2" x 4" lumber
- Gives your fender installation a clean, professional look
Regular Price $8.16 -
Item # FM-ECW- For use with 4" x 4" lumber and can be cut for 2" x 4" lumber
- Gives your fender installation a clean, professional look
Regular Price $8.16 -
Item # RPB-3.30- Polyester textile cover and closed cell foam inner cushion
- Low-maintenance surface—just wash with soap and a brush
- Flexible design fits curves and corners with ease
- 1" wide flexible tab system supports standard top-mounting or a fold-over option that hides the top row of fasteners
Regular Price $59.99Only 6 left -
Item # RPB-4.30- Polyester textile cover and closed cell foam inner cushion
- Low-maintenance surface—just wash with soap and a brush
- Flexible design fits curves and corners with ease
- 1" wide flexible tab system supports standard top-mounting or a fold-over option that hides the top row of fasteners
Regular Price $72.99 -
Item # RPB-6.30- Polyester textile cover and closed cell foam inner cushion
- Low-maintenance surface—just wash with soap and a brush
- Flexible design fits curves and corners with ease
- 1" wide flexible tab system supports standard top-mounting or a fold-over option that hides the top row of fasteners
Regular Price $109.99Only 4 left -
Item # VE-D-5001B-05
- Small "P" profile, black
- 3-1/4" H x 2-1/8" W x 5' L
- Mounts horizontally
- Commercial grade
Regular Price $29.24 -
Item # Wheel-5x2- Heavy Duty 5" x 2" black phenolic wheels are used for ramps.
- Use with 3/4" diameter axle..
Regular Price $22.95 -
Item # FM-06B- Ideal for most boats ranging from 30' to 90'
- Mounts to any nominal 2" x 4" or 4" x 4"
- Fender only, end cap and lumber sold seperately
Regular Price $89.57 -
Sold OutItem # FM-06W- Ideal for most boats ranging from 30' to 90'
- Mounts to any nominal 2" x 4" or 4" x 4"
- Fender only, end cap and lumber sold seperately
Regular Price $89.57 -
Item # FM-08B- Ideal for most boats ranging from 30' to 90'
- Mounts to any nominal 2" x 4" or 4" x 4"
- Fender only, end cap and lumber sold seperately
Regular Price $119.81 -
Item # FM-08W- Ideal for most boats ranging from 30' to 90'
- Mounts to any nominal 2" x 4" or 4" x 4"
- Fender only, end cap and lumber sold seperately
Regular Price $119.81 -
Item # FM-10B- Ideal for most boats ranging from 30' to 90'
- Mounts to any nominal 2" x 4" or 4" x 4"
- Fender only, end cap and lumber sold seperately
Regular Price $149.31 -
Item # FM-10W- Ideal for most boats ranging from 30' to 90'
- Mounts to any nominal 2" x 4" or 4" x 4"
- Fender only, end cap and lumber sold seperately
Regular Price $149.31 -
Item # FM-M-06B-24- Ideal for most boats ranging from 30' to 90'
- Mounted on recycled plastic 2" x 4" with one end cap
- 3 mounting holes are predrilled through the fender and 2" x 4" plastic lumber
- Special order, non-refundable, non-returnable
Regular Price $143.18 -
Item # FM-M-06B-44- Ideal for most boats ranging from 30' to 90'
- Mounted on recycled plastic 4" x 4" with one end cap
- 3 mounting holes are predrilled through the fender and 4" x 4" plastic lumber
- Special order, non-refundable, non-returnable
Regular Price $179.18 -
Item # FM-M-06W-24- Ideal for most boats ranging from 30' to 90'
- Mounted on recycled plastic 2" x 4" with one end cap
- 3 mounting holes are predrilled through the fender and 2" x 4" plastic lumber
- Special order, non-refundable, non-returnable
Regular Price $143.18 -
Item # FM-M-06W-44- Ideal for most boats ranging from 30' to 90'
- Mounted on recycled plastic 4" x 4" with one end cap
- 3 mounting holes are predrilled through the fender and 4" x 4" plastic lumber
- Special order, non-refundable, non-returnable
Regular Price $179.18 -
Item # FM-M-08B-24- Ideal for most boats ranging from 30' to 90'
- Mounted on recycled plastic 2" x 4" with one end cap
- 3 mounting holes are predrilled through the fender and 2" x 4" plastic lumber
- Special order, non-refundable, non-returnable
Regular Price $188.10
Filters